One continuous surface, poured over what you already have.
Microcement goes directly over your existing tile, concrete or drywall — 2 to 3 mm thick, no joints, no demolition. Floors, walls, showers and countertops, residential and commercial.
Why microcement
The look of poured concrete, without the weight, without the grout lines, and without tearing out what's already there.
No demolition
We apply straight over your existing tile, concrete or drywall. No jackhammer, no dumpster, no weeks of dust — and you keep your floor height.
No grout lines
One continuous surface from floor to wall, with no grout to scrub and no lines chopping up the room visually. It's what makes small spaces read bigger.
Waterproof
Sealed with a two-component polyurethane system. Built for showers, bathrooms, kitchens and Montreal winter entryways.
Hard-wearing
High-performance resin bound into a fine mortar: stands up to foot traffic, chairs, carts and winter boots. Compatible with radiant heated floors.
Custom finish
Five finishes, tinted to order. You approve a sample applied in your own home, in your own light, before we touch the surface.
5-year warranty
Workmanship and adhesion warranted for five years, in writing. We're certified applicators and carry full liability insurance.
Bathrooms, kitchens, open-plan living
Residential is where microcement earns its keep: an entire bathroom — floor, walls and shower — in one continuous surface, laid without pulling out a single tile.
- Continuous floors and open-plan areas
- Showers and tubs with no grout lines
- Countertops, vanities and backsplashes
Retail, restaurants, offices, clinics
We work evenings and weekends to hand back a surface that's ready to open without closing your doors for a full week. High-traffic commercial sealer available.
- Evening and weekend scheduling
- High-traffic commercial sealer
- Coordination with your general contractor
Five finishes, tinted to order
From smooth uniform concrete to textured travertine, every finish is custom-tinted and signed off by you — on a sample applied in your own home — before the surface is touched.
- Sample applied in your home
- Custom tint at no extra charge
- Matte, satin or gloss sheen
Our prices, posted.
Floor and wall rates come down as the area goes up: setup, masking and cure days cost the same on 100 sq ft as they do on 800.
Open-plan areas, basements, retail
Kitchens, large bathrooms
Bathrooms, entryways, powder rooms
Project minimum: $3,900 · Prices shown are before GST (5%) and QST (9.975%).
Microcement in place
Floors, walls, showers and countertops across Greater Montreal.
Reference images showing the finish — our own portfolio lands with our first projects.
How it works
Four stages, a clear schedule, and a job site you can follow from start to finish.
Consultation & samples
We measure the surfaces, assess the substrate, and leave finish samples with you to look at in your own lighting.
Substrate prep
Clean, degrease, level any hollows, and bridge existing joints with mesh. This stage is where durability is won or lost.
Application
Bonding primer, two base coats and two finish coats, trowelled by hand and sanded between passes.
Sealing
Two to three coats of polyurethane sealer. Light foot traffic after 24 h, full use after 7 days.
Frequently asked questions
Ready to see what it would look like at your place?
Describe your surfaces and get a detailed quote in under 24 hours. Free, no obligation, priced line by line.